B1442

AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1442/42: Air Inlet Damper Control Servo Motor Circuit
B1442/42 - Air Inlet Damper Control Servo Motor Circuit

DESCRIPTION

The air inlet damper servo sends pulse signals to inform the air conditioning amplifier of the damper position. The air conditioning amplifier activates the motor (normal, reverse) based on the signals to move the air inlet damper to any position, which controls the intake air settings (FRESH, FRESH / RECIRCULATION and RECIRCULATION).

HINT
Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or damper is mechanically locked.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (AIR INLET DAMPER TARGET PULSE)

(a) Use the Data List to check if the servo motor is functioning properly.

Air conditioner





OK:

The display is as specified in the normal condition.

NG -- REPLACE AIR INLET SERVO MOTOR

OK -- REPLACE AIR CONDITIONING AMPLIFIER Removal

2. REPLACE AIR INLET SERVO MOTOR

(a) Replace the air inlet servo motor Disassembly.

HINT
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

NEXT -- Continue to next step.

3. RECHECK DTC

(a) Clear the DTCs DTC Check / Clear.

(b) Check for DTCs DTC Check / Clear.

OK:

DTC B1442 is not output.

NG -- REPLACE AIR CONDITIONING HARNESS Disassembly

OK -- END (AIR INLET SERVO MOTOR IS DEFECTIVE)