B1453

AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1453/53: Driver Side Air Outlet Damper COOL Control Servo Motor Circuit
B1453/53 - Driver Side Air Outlet Damper COOL Control Servo Motor Circuit

DESCRIPTION

The air mix damper servo (for driver side COOL) sends pulse signals to inform the air conditioning amplifier of the damper position. The air conditioning amplifier activates the motor (normal, reverse) based on the signals to move the air mix damper (for driver side COOL) to any position. As a result, the amount of air that has passed through the evaporator and is passing through the heater core is adjusted, and the temperature of the air blowing toward the driver side is controlled.

HINT
Confirm that no mechanical problem is present because this diagnostic code can be output when either a damper link or damper is mechanically locked.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (AIR MIX SERVO MOTOR TARGET PULSE (for Driver Side COOL))

(a) Use the Data List to check if the servo motor is functioning properly.

Air conditioner





OK:

The display is as specified in the normal condition.

NG -- REPLACE AIR MIX SERVO MOTOR (for Driver Side COOL)

OK -- REPLACE AIR CONDITIONING AMPLIFIER Removal

2. REPLACE AIR MIX SERVO MOTOR (for Driver Side COOL)

(a) Replace the air mix servo motor Disassembly.

HINT
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.

NEXT -- Continue to next step.

3. RECHECK DTC

(a) Clear the DTCs DTC Check / Clear.

(b) Check for DTCs DTC Check / Clear.

OK:

DTC B1453 is not output.

NG -- REPLACE AIR CONDITIONING HARNESS Disassembly

OK -- END (AIR MIX SERVO MOTOR (for Driver Side COOL) IS DEFECTIVE)