B15A8

CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: B15A8: Telematics Transceiver Malfunction
B15A8 - Telematics Transceiver Malfunction

DESCRIPTION

This DTC is stored when an error in the EEPROM or PLL IC is detected during the DCM (telematics transceiver) self-check. The EEPROM (Electrically Erasable Programmable Read-Only Memory) stores the various data to operate the Safety Connect System. The PLL IC (Phase-Locked Loop Integrated Circuit) oscillates the telephone radio frequency.





INSPECTION PROCEDURE

NOTICE:
Regardless of whether DTC B15A8 has been output as a present or past DTC, the DCM (telematics transceiver) should be replaced.

PROCEDURE

1. REPLACE DCM (TELEMATICS TRANSCEIVER)

(a) Replace the DCM (telematics transceiver) Removal.

NOTICE:
* The power switch must be off.
* Do not replace the DCM (telematics transceiver) with one from another vehicle.

NEXT -- PERFORM DCM ACTIVATION DCM Activation