B2225

ENGINE HOOD / DOOR: POWER TRUNK LID SYSTEM: B2222,B2225: PBD Pulse Sensor Malfunction

B2222 - PBD Pulse Sensor Malfunction
B2225 - Back Door Motor Clutch Malfunction

DESCRIPTION

* "PBD" refers to the power trunk opener and closer.

* DTC B2222 is output in the following situations: 1) When the pulse sensor of the luggage closer motor has a malfunction and a normal waveform is not input into the pulse sensor during the power trunk lid operation, or 2) when there is a malfunction in the power trunk opener and closer activation power supply.





* "Back door" refers to the luggage compartment door.

* DTC B2225 is output when there is malfunction in the clutch of the luggage closer motor, or when there is a malfunction in the power trunk opener and closer activation power supply.





WIRING DIAGRAM

Refer to "Luggage Compartment Door Closer does not Operate" Luggage Compartment Door Closer Does Not Operate.

INSPECTION PROCEDURE

PROCEDURE

1. INSPECT FUSE (PTL)

(a) Remove the PTL fuse from the luggage room junction block.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPLACE FUSE
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (LUGGAGE CLOSER MOTOR - BATTERY AND BODY GROUND)

(a) Disconnect the S43 motor connector.





(b) Measure the resistance and voltage according to the value(s) in the table below.

Standard resistance:





Standard voltage:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE LUGGAGE CLOSER MOTOR ASSEMBLY Components