B2482

LIGHTING: LIGHTING SYSTEM: B2482: Clearance Light Circuit Transistor
B2482 - Clearance Light Circuit Transistor

DESCRIPTION

The multiplex network front light ECU (front controller) illuminates and turns off the clearance light.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (CLEARANCE LIGHT)

(a) Using the Techstream, read the Data List.

Body No. 5





OK:

Normal condition listed above is displayed.

NG -- CHECK HARNESS AND CONNECTOR (MULTIPLEX NETWORK FRONT LIGHT ECU - HEADLIGHT)

OK -- REPLACE MULTIPLEX NETWORK FRONT LIGHT ECU

2. CHECK HARNESS AND CONNECTOR (MULTIPLEX NETWORK FRONT LIGHT ECU - HEADLIGHT)





(a) Disconnect the B14 ECU connector.

(b) Disconnect the B1 and B11 light connectors.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:

for LH
for RH










Result





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. CHECK HEADLIGHT ASSEMBLY (OPERATION)

(a) Temporarily replace the headlight with a new or normally functioning one.

HINT
* for HID Headlight Removal.
* for LED Headlight Removal.

(b) Check for DTC Reading and Clearing Diagnostic Trouble Codes.

OK:

DTC B2482 output does not occur.

Result





C -- END (REPLACE HEADLIGHT ASSEMBLY) Removal

B -- END (REPLACE HEADLIGHT ASSEMBLY) Removal

A -- REPLACE MULTIPLEX NETWORK FRONT LIGHT ECU