C1300

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction
C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self-diagnosis.





INSPECTION PROCEDURE

NOTICE:
When replacing the skid control ECU, perform the following operations:

- Initialization of linear solenoid valve and calibration Initialization
- Yaw rate and acceleration sensor zero point calibration Calibration

PROCEDURE

1. REPLACE SKID CONTROL ECU

(a) Replace the skid control ECU Removal.

NEXT -- PERFORM TEST MODE (SIGNAL CHECK) Test Mode Procedure