C1555

POWER STEERING: POWER STEERING SYSTEM: C1521-C1555: Motor Circuit Malfunction


DESCRIPTION

The power steering ECU supplies current to the power steering motor through this circuit.





WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (POWER STEERING ECU - POWER STEERING MOTOR)

(a) Disconnect the C1 power steering ECU connector.





(b) Disconnect the C3 power steering motor connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. INSPECT POWER STEERING GEAR ASSEMBLY (POWER STEERING MOTOR)

(a) Disconnect the C3 power steering motor connector.

(b) Measure the resistance according to the value(s) in the table below.





Standard resistance:





NOTICE:
- If replacing the power steering gear assembly, clear the rotation angle sensor calibration value, initialize the rotation angle sensor value, and calibrate the torque sensor zero point Power Steering System.
- If replacing the power steering ECU, initialize the rotation angle sensor value and calibrate the torque sensor zero point Power Steering System.

NG -- REPLACE POWER STEERING GEAR ASSEMBLY Removal

OK -- REPLACE POWER STEERING ECU Removal