C164E

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C164E: Stop Switch Circuit Malfunction
C164E - Stop Switch Circuit Malfunction

DESCRIPTION

This DTC is stored when the parking assist ECU receives a stop light switch assembly open signal from the electronically controlled brake system via CAN communication.





INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC

(a) Clear the DTCs Advanced Parking Guidance System.

(b) Check for DTCs Advanced Parking Guidance System.

Result





HINT
- The DTC is stored when a malfunction occurs in the electronically controlled brake system.
- If troubleshooting and repair of the malfunction in the electronically controlled brake system has been completed, DTC C164E will not be output again when rechecking for DTCs.
- If DTC C164E is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs How To Proceed With Troubleshooting.

B -- GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM How To Proceed With Troubleshooting

A -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting