C1695

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C1695: Zero point Calibration of Vehicle Height Sensor Incomplete
C1695 - Zero point Calibration of Vehicle Height Sensor Incomplete

DESCRIPTION

When the self-diagnosis of the parking assist ECU determines that the vehicle height sensor zero point calibration (height control sensor vehicle height difference setting) is incomplete, this DTC is output.





INSPECTION PROCEDURE

NOTICE:
- When "System initializing" is displayed on the display and navigation module display after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point Initialization.
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the advanced parking guidance system may be needed Calibration.

PROCEDURE

1. ADJUST HEIGHT CONTROL SENSOR HEIGHT

(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.

(1) Perform the height control sensor vehicle height difference setting Calibration.

NEXT -- Continue to next step.

2. CHECK FOR DTC

(a) Clear the DTCs Advanced Parking Guidance System.

(b) Check for DTCs Advanced Parking Guidance System.

Result





HINT
- If DTC C1695 is output, perform the height control sensor vehicle height difference setting again.
- If DTC C1695 is still output after performing the height control sensor vehicle height setting 3 times, replace the parking assist ECU.

B -- REPLACE PARKING ASSIST ECU Removal

A -- USE SIMULATION METHOD TO CHECK How To Proceed With Troubleshooting