Engine Immobilizer System

ENGINE IMMOBILIZER: ENGINE IMMOBILIZER SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical or Powertrain / (desired system) / Trouble Codes.

(e) Read the DTCs.

HINT
* When using the Techstream with the power switch OFF to troubleshoot: Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 seconds intervals until communication between the tester and vehicle begins.
* Refer to the Techstream operator's manual for further details.
2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical or Powertrain / (desired system) / Trouble Codes.

(e) Erase the DTCs.

HINT
* When using the Techstream with the power switch OFF to troubleshoot: Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 seconds intervals until communication between the tester and vehicle begins.
* Refer to the Techstream operator's manual for further details.