Installation

NAVIGATION: DISPLAY AND NAVIGATION ASSEMBLY: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 RADIO BRACKET

(a) Install the No. 2 radio bracket with the 2 bolts.

2. INSTALL NO. 1 RADIO BRACKET

(a) Install the No. 1 radio bracket with the 2 bolts.

3. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET

(a) Connect the connectors.

(b) Insert the display and navigation module display with bracket and attach the 6 clips on its backside.

HINT
Evenly push the right and left sides of the display and navigation module display with bracket into the instrument panel.

4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY Installation

7. INSTALL NO. 3 BOX PANEL Installation

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL BATTERY SERVICE HOLE COVER LH Installation

13. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

14. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation