Installation

NAVIGATION: NAVIGATION ECU (for DVD): INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL NO. 2 DISC PLAYER BRACKET





(a) Install the bracket's aligning protrusions labeled A to the ECU.

(b) Install the No. 2 disc player bracket with the 2 screws labeled B.

2. INSTALL NO. 1 DISC PLAYER BRACKET





(a) Install the bracket's aligning protrusions labeled A to the ECU.

(b) Install the No. 1 disc player bracket with the 2 screws labeled B.

3. INSTALL NAVIGATION ECU WITH DISC PLAYER BRACKET





(a) Connect the ECU connectors.

(b) Install the navigation ECU with disc player bracket with the 3 bolts.

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

6. INSTALL INSTRUMENT PANEL LOWER Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

9. INSTALL INSTRUMENT SIDE PANEL RH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSTALL BATTERY SERVICE HOLE COVER LH Installation

12. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire) Installation

13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

14. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.