Installation

INTERIOR: REAR CONSOLE BOX: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SEAT CONSOLE ARMREST ASSEMBLY

(a) Connect the connector.

(b) Install the rear seat console armrest with the 2 screws.

(c) Install the 8 nuts and 2 bolts.

2. INSTALL REAR SEAT CONSOLE ARMREST COVER

(a) Install the rear seat console armrest cover.

3. INSTALL REAR SEAT CONSOLE TABLE ASSEMBLY

(a) Install the rear seat console table with the 2 nuts and 2 bolts.

4. INSTALL FRONT REAR SEAT CONSOLE TABLE COVER

(a) Push down the table cover to attach the 2 hooks.

(b) Attach the 2 claws to install the front rear seat console table cover.

5. INSTALL REAR POWER SEAT SWITCH

(a) Install the rear power seat switch with the 4 screws.

6. INSTALL REAR SEAT CONSOLE PANEL ASSEMBLY

(a) Connect the connector.

(b) Attach the 6 clips to install the rear seat console panel.

7. INSTALL REAR SEAT CONSOLE ARMREST GARNISH LH

(a) While lowering the rear seat console armrest garnish, attach the 3 claws and 2 clips to install it.

8. INSTALL REAR SEAT CONSOLE ARMREST GARNISH RH

HINT
Use the same procedures described for the LH side.

9. INSTALL REAR SEAT CONSOLE BOX ASSEMBLY

(a) Connect the connector.

(b) Move the console box in the direction of the arrow shown in the illustration, and attach the 2 clips. Then install the console box with the 2 bolts.

(d) Attach the 4 clips to install the rear seat front console box panel.

10. INSTALL LOWER REAR SEAT CONSOLE BOX COVER

(a) Attach the 2 hooks to install the lower rear seat console cover to the console box.

(b) Attach the 4 claws.