Installation

2UR-FSE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR





(a) Install a new gasket to the sensor.

(b) Install the sensor.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the sensor connector.

2. ADD ENGINE COOLANT Service and Repair

3. INSPECT FOR COOLANT LEAK

4. INSTALL NO. 1 ENGINE UNDER COVER Installation

5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH Installation

6. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH Installation

7. INSTALL NO. 1 AIR CLEANER INLET Installation

8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation