Installation

PARKING BRAKE: ELECTRIC PARKING BRAKE ECU: INSTALLATION

1. INSTALL ELECTRIC PARKING BRAKE ECU

(a) Install the ECU with the 2 nuts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Connect the 2 ECU connectors.

2. INSTALL SEAT BELT CONTROL ECU Installation

3. INSTALL REAR ACTIVE STABILIZER CONTROL ECU (w/ Active Stabilizer System) Installation

4. INSTALL SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman) Installation

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation

6. INSTALL REAR FLOOR FINISH PLATE Installation

7. INSTALL TOOL BOX (w/o Spare Tire) Installation

8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation

10. INSTALL NO. 1 COOLER COVER (w/ Rear Air Conditioning System) Installation

11. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation

12. INSTALL DECK TRIM SIDE BOARD RH Installation

13. INSTALL ROPE HOOK ASSEMBLY Installation

14. INSTALL ROPE HOOK Installation

15. INSTALL BATTERY CARRIER Installation

16. INSTALL BATTERY Installation

17. INSTALL SPARE TIRE (w/ Spare Tire)

18. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)

19. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

21. INSTALL BATTERY SERVICE HOLE COVER LH Installation

22. PERFORM CALIBRATION

(a) Clear the electric parking brake ECU memory and acquire tension sensor zero point Programming and Relearning.