Installation

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: INSTALLATION

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.
1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY





(a) for Ottoman:

(1) for Passenger Side:

Install the anchor bracket with the 2 bolts.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

(2) for Driver Side:





(2) Install the anchor bracket with the bolt.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)





(b) for Power Seat, for Fixed Seat Type:

Align the claw with the positioning hole and install the 2 anchor brackets with the 2 bolts.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

2. INSTALL INNER CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY





(a) for Power Seat, for Fixed Seat Type:

(1) Align the hole with the positioning pin and install the 2 anchor brackets with the 2 bolts.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)





(b) for Ottoman:

Align the hole with the positioning pin and install the anchor bracket with the bolt.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

3. INSTALL REAR SEAT ASSEMBLY

(a) for Power Seat:

Install the rear seat Installation.

(b) for Ottoman:

Install the rear seat Installation.

(c) for Fixed Seat Type:

Install the rear seat Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL BATTERY SERVICE HOLE COVER LH Installation

6. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation