Connecting Rod, Engine

Connecting rod

Cap tightening
Step 1 40 Nm (408 kgf-cm, 30 ft-lbf)
Step 2 90°

Thrust clearance
Standard 0.15 to 0.55 mm (0.00591 to 0.0217 in.)
Maximum 0.70 mm (0.0276 in.)

Oil clearance
Standard 0.025 to 0.050 mm (0.000984 to 0.00197 in.)
Maximum 0.070 mm (0.00276 in.)

Big end inside diameter
Mark 1 56.000 to 56.006 mm (2.20472 to 2.20496 in.)
Mark 2 56.007 to 56.012 mm (2.20500 to 2.20520 in.)
Mark 3 56.013 to 56.018 mm (2.20524 to 2.20543 in.)
Mark 4 56.019 to 56.024 mm (2.20547 to 2.20567 in.)