Cylinder Head Assembly

Cylinder head bolts





Measuring point

90 mm (3.54 in.) for intake side bolt
85 mm (3.35 in.) for exhaust side bolt

Standard outside diameter 10.85 to 11.00 mm (0.427 to 0.433 in.)
Minimum outside diameter 10.6 mm (0.417 in.)

If the diameter is less than the minimum, replace the cylinder head set bolt

Tighting torque








Step 1 36 Nm (367 kgf-cm, 27 ft-lbf)
Step 2 90°
Step 3 90°








Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

Standard warpage
Cylinder head lower side 0.05 mm (0.00197 in.)
Intake side 0.08 mm (0.00315 in.)
Exhaust side 0.05 mm (0.00197 in.)

Maximum warpage 0.10 mm (0.00394 in.)

Camshaft housing

LH:

RH:

Bolt A 10 Nm (102 kgf-cm, 7 ft-lbf)
Except bolt A 30 Nm (306 kgf-cm, 22 ft-lbf)

RH:

Torque 16 Nm (163 kgf-cm, 12 ft-lbf)

Intake manifold Specifications

Exhaust manifold Specifications

Camshaft gear/sprocket Specifications