Removal

2UR-FSE CHARGING: BATTERY: REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER LH Removal

3. REMOVE BATTERY





(a) Disconnect the cable from negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* w/ Navigation System (for HDD):
* After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
(b) Disconnect the cable from positive (+) battery terminal.

(c) Disconnect the thermistor sensor connector.

(d) Disconnect the battery room ventilation hose.

(e) Remove the nut and battery clamp.

(f) Remove the bolt and No. 2 battery hold down clamp.

(g) Remove the battery.

4. REMOVE BATTERY CARRIER





(a) Remove the 3 bolts and battery carrier.