HDD Navigation System - CDDB Update Process
L-SB-0046-08Rev1
July 30, 2008
HDD Navigation CDDB Update Process
Service Category
Audio/Visual/Telematics
Section
Navigation/Multi Info Display
Market
USA
Applicability
TSB REVISION NOTICE
^ August 4, 2009 Rev1:
^ Applicability has been updated to include 2010 LS 460, LS 600h, and LX 570 models.
^ TIS Techstream software has been updated.
Any previous printed versions of this service bulletin should be discarded.
TSIB SUPERSESSION NOTICE
The information contained in this TSIB supersedes TSIB No. SS004-07.
^ Applicability has been updated to include 2008 - 2009 model year LX 570 and 2009 model year LS 4601600h vehicles.
^ Version verification section has been updated.
^ Vehicle Load section has been updated.
TSIB No. SS004-07 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding.
Introduction
Lexus models equipped with a Hard Disk Drive (HDD) Navigation System contain a jukebox feature that allows up to 2000 audio recordings to be transferred from their original CD media to the HDD on-board the vehicle. Detailed information about the audio recordings is attached to each track at the time of transfer. When each audio track is presented on the touch screen informational details including Genre Artist Album and Title are presented. This detailed track information is stored on the HDD in the Compact Disc Database or CDDB.
CDDB data updates will be released quarterly through the Technical Information System (TIS) and can be uploaded to the vehicle using the Navigation Update Tool and Navigation Programs Installer software. CDDB data only needs to be loaded onto the Navigation Update Tool once per quarterly release. Vehicle CDDB updates are performed using the Navigation Update Tool.
Follow the procedures listed in this bulletin to:
^ Determine the current version of the CDDB data on the vehicle and installed on the Navigation Update Tool.
^ Load the latest CDDB data onto the Navigation Update Tool.
^ Connect the Navigation Update Tool to the vehicle and update the vehicle to the latest release.
^ Update the CDDB data for any audio tracks transferred to the vehicle for which CDDB data was not previously available.
Warranty Information
Service Information
Service Applicability:
This service will be provided under the Lexus Courtesy Maintenance program for 48 months, unlimited mileage. Each update may only be performed once per quarter per vehicle. Please refer to the Lexus and Parts Operations Communication (SPOC) bulletin
Required Tools & Equipment
Version Verification
^ In order to perform the procedures outlined in this TSIB, you MUST have completed the setup procedure in TSIB No. L-SB-0042-08, "HDD Navigation Program Setup".
^ Before performing this procedure, disconnect all other USB peripheral and external storage devices (i.e., USB thumb drives, hard drives, cameras, mice, etc.).
^ For additional details, refer to the on TIS (under Diagnostic / Telematics tabs, "Reference Documents").
Before performing a CDDB update, confirm that the Navigation Update Tool and/or the vehicle's Navigation System are NOT up-to-date.
Checking for Current CDDB Version on Navigation Update Tool
1. Open the Navigation Programs Installer
NOTE
^ When properly installed, the Navigation Programs Installer icon will be found on the TIS Techstream desktop.
^ If the application is NOT properly installed, refer to TSIB No. L-SB-0042-08, "HDD Navigation Program Setup".
2. Click Version Check on the "Navigation Update Tool Main Menu".
3. Connect the Navigation Update Tool.
A. Make sure the USB cable is secured in both the PC and the Navigation Update Tool USB ports.
B. Confirm that the Navigation Update Tool is powered correctly.
C. Turn power ON.
D. Press Continue.
4. Compare the CDDB version with the CDDB version shown on TIS.
NOTE
^ If the CDDB version on the Navigation Update Tool is the same as shown on TIS, then go to the "Vehicle Load" section in this TSIB.
^ If the CDDB version on the Navigation Update Tool is NOT the same as shown on TIS, then go to the "Tool Load" section in this TSIB.
Checking CDDB Version on Vehicle HDD Navigation System
1. Turn vehicle ignition ON (engine OFF).
2. From the multi-information display press I Agree.
3. Press the MENU button.
4. From the multi-information display press HDD Data.
5. Compare the CDDB version on the Navigation System to that on the Navigation Update Tool.
NOTE
^ If the CDDB version on the vehicle is the same as shown on the Navigation Update Tool, then the vehicle does NOT need the update.
^ If the CDDB version on the vehicle is NOT the same as shown on the Navigation Update Tool, then go to the "Vehicle Load" section in this TSIB.
Tool Load
Loading CDDB Data onto Navigation Update Tool
NOTE
There are two separate processes used to update the CDDB data on the vehicle:
^ Loading the CDDB data onto the Navigation Update Tool.
^ Loading the CDDB data into the vehicle HDD Navigation System.
If the CDDB version on the Navigation Update Tool is the same as shown on TIS, then go to the "Vehicle Load" section in this TSIB.
If the CDDB version on the Navigation Update Tool is NOT the same as shown on TIS, then follow the instructions below.
NOTE
^ In order to perform the following procedure, the PC being used MUST be in Administrator Mode. Software will NOT complete CDDB download if this is not met.
^ Before performing this procedure, disconnect all other USB peripheral and external storage devices (i.e., USB thumb drives, hard drives, cameras, mice, etc.).
1. Log into TIS.
2. Download the CDDB data file.
A. Click on the TIS tab.
B. Click on the Diagnostics tab.
C. Click on the Telematics tab.
D. Click on the CDDB Data link on TIS.
3. Click Open to begin the download.
NOTE
The file is large and may take up to 10 minutes to download.
4. Connect the Navigation Update Tool.
A. Make sure the USB cable is secured in both the PC and the Navigation Update Tool USB ports.
B. Confirm that the Navigation Update Tool is powered correctly.
C. Turn the power ON.
D. Click Continue.
CDDB Data will decompress before it is copied onto the Navigation Update Tool.
5. Verify the correct version of CDDB data to load onto the Navigation Update Tool.
6. Click Continue to load CDDB data onto the Navigation Update Tool.
CDDB data will then copy to the Navigation Update Tool (requires about 5 minutes).
7. Verify the CDDB data is loaded onto the Navigation Update Tool and can now be used to update the vehicle.
Vehicle Load
Loading CDDB Data onto Vehicle HDD Navigation System
NOTE
^ Prior to connecting to the vehicle, you MUST disconnect the navigation update tool from the PC.
^ Connect the battery charger to the vehicle prior to beginning process to ensure constant battery voltage.
1. Connect the Navigation Update Tool to the vehicle.
A. Make sure the IEEE 1394 cable is secured in both the Navigation Update Tool and the vehicle connector.
B. Confirm the Navigation Update Tool is powered correctly.
C. Turn power ON.
2. Turn vehicle ignition ON (engine OFF).
3. From the multi-information display press I Agree.
4. Press the MENU button.
5. From the multi-information display press HDD Data.
6. Press CDDB Update.
7. Press I Agree.
8. Allow CDDB data to copy (requires about 5 minutes).
9. Press OK.
10. Disconnect the Navigation Update tool from the vehicle.
Update Music
Updating Music Data AFTER CDDB Data Installation
After a successful CDDB update some albums may still display without the updated information. These albums will need to be manually updated using the following procedure.
1. Press DISC-AUX.
2. Press Album List.
3. Press Manage Albums after selecting desired album to update.
HINT
Only albums without a name label need to be updated.
4. Press Edit Cuffent Album.
5. Press Search For Track Info.
Notice that selected album shows up as a Time and a Date.
6. Once the HDDCD Title Confirmation screen appears press OK.
NOTE
If album information still displays a time and a date as the album title, then the CD was released after the current data was updated.
7. Allow data to update.
8. Press the Back Arrow.
Notice the selected album now has a title.
9. Verify the updated album information is now in the HDDALBUM list.