Reading and Clearing Diagnostic Trouble Codes

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

(e) Read the DTCs by following the directions on the tester's screen.

HINT
Refer to the Techstream operator's manual for further details.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch ON (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.

(e) Erase the DTCs by following the directions on the tester's screen.

HINT
Refer to the Techstream operator's manual for further details.