How To Proceed With Troubleshooting

WIPER AND WASHER: WIPER AND WASHER SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use these procedures to troubleshoot the wiper and washer system.
* *: Use the intelligent tester or Techstream.
1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the intelligent tester or Techstream to check if the CAN communication system is functioning normally.





B -- Go to CAN COMMUNICATION SYSTEM Diagnosis System
A -- Continue to next step.

4. CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

(a) Use the intelligent tester or Techstream to check if the LIN communication system is functioning normally.





B -- Go to LIN COMMUNICATION SYSTEM LIN Communication System
A -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE





B -- Go to step 7
A -- Continue to next step.

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU Pinout Values and Diagnostic Parameters.

(b) DATA LIST / ACTIVE TEST Scan Tool Testing and Procedures.

NEXT -- Continue to next step.

7. REPAIR OR REPLACE

NEXT -- Continue to next step.

8. CONFIRMATION TEST

NEXT -- END