Disassembly

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR: DISASSEMBLY

HINT
Use the some procedures for the RH side and LH side.

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP





(a) Remove the 2 screws and striker grip.

2. REMOVE LUGGAGE COMPARTMENT DOOR STRIKER ASSEMBLY





(a) Remove the 2 bolts and door striker.

HINT
If shims are present, store them.

3. REMOVE LUGGAGE COMPARTMENT DOOR COVER





(a) Using a clip remover, remove the 19 clips.

(b) Detach the 4 fasteners.

(c) Remove the luggage compartment door cover.

4. REMOVE CENTER STOP LIGHT ASSEMBLY Removal

5. REMOVE REAR SPOILER SUB-ASSEMBLY Removal

6. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY LH





(a) Remove the 2 nuts.

(b) Using a screwdriver, detach the clip and remove the garnish.

7. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY RH

HINT
Use the same procedures described for the LH side.

8. REMOVE BACK DOOR STOPPER LOWER

(a) Remove the 4 bolts and 2 stoppers.

9. REMOVE LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY





(a) Disconnect the connector.

(b) Using a clip remover, detach the wire harness clamps.

(c) Remove the 6 bolts and door panel.

10. REMOVE LUGGAGE COMPARTMENT DOOR WEATHERSTRIP