Seat Belt Warning System (W/O Occupant Classification System)

SEAT BELT: SEAT BELT WARNING SYSTEM (w/o Occupant Classification System): DATA LIST / ACTIVE TEST

1. ACTIVE TEST

Using the Techstream to perform Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Warm up the engine.

(b) Turn the ignition switch OFF.

(c) Connect the Techstream to the DLC3.

(d) Turn the ignition switch ON.

(e) Turn the tester on.

(f) Enter the following menus: Body Electrical / Combination Meter / Active Test.

(g) According to the display on tester, perform the "Active Test".





HINT
*: Confirm that the vehicle is stopped with the engine idling.