Engine Immobilizer System

THEFT DETERRENT / KEYLESS ENTRY: ENGINE IMMOBILIZER SYSTEM: DTC CHECK / CLEAR

HINT
* When using the Techstream with the power switch off to troubleshoot: Connect the Techstream to the vehicle and turn a courtesy light switch on and off at 1.5 second or less intervals until communication between the Techstream and vehicle begins.
* Refer to the Techstream operator's manual for further details.

1. CHECK FOR IMMOBILIZER DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.

(e) Check for DTCs.

2. CHECK FOR POWER MANAGEMENT CONTROL ECU DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

(e) Check for DTCs.

3. CLEAR IMMOBILIZER DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.

(e) Clear the DTCs.

4. CLEAR POWER MANAGEMENT CONTROL ECU DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

(e) Clear the DTCs.