Installation
INTERIOR PANELS / TRIM: LOWER INSTRUMENT PANEL: INSTALLATION
1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Navigation System)
(a) When using a new lower instrument panel sub-assembly:
(1) Immediately before installing the lower instrument panel sub-assembly, twist and cut off the portion shown in the illustration.
(b) Engage the 2 guides.
(c) Install the lower instrument panel sub-assembly with the 4 bolts [A], 10 screws [B] or [C] and screw [D].
(d) Engage the 2 claws to connect the DLC3 connector.
(e) Engage each clamp.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/ Navigation System)
(a) When using a new lower instrument panel sub-assembly:
(1) Immediately before installing the lower instrument panel sub-assembly, twist and cut off the portion shown in the illustration.
(b) Engage the 2 guides.
(c) Install the lower instrument panel sub-assembly with the 2 bolts [A], 10 screws [B] or [C] and screw [D].
(d) Engage the 2 claws to connect the DLC3 connector.
(e) Engage each clamp.
3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Engage the 2 guides and claw to connect the hood lock control lever sub-assembly.
4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Navigation System)
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 2 clips as shown in the illustration.
(d) Install the center instrument cluster finish panel assembly with the 2 bolts [A].
5. INSTALL BACK-UP BATTERY WITH BRACKET (w/ Safety Connect System) Installation
6. INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET
(a) Engage the 2 guides.
(b) Install the No. 1 console box mounting bracket with the 2 bolts [A].
(c) Engage each clamp.
7. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET
(a) Engage the 3 guides.
(b) Install the No. 3 console box mounting bracket with the 4 bolts [A].
(c) Engage the clamp.
8. INSTALL TRANSMISSION INSTRUMENT PANEL SHIFT ASSEMBLY Installation
9. INSTALL CONSOLE BOX RH
(a) Engage the guide and 2 claws.
(b) Engage the 3 clips.
(c) Install the console box RH with the bolt [A] and clip.
10. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
(a) Engage the 5 claws to install the front No. 2 console box insert.
11. INSTALL CONSOLE BOX LH
(a) Engage the guide and 2 claws.
(b) Engage the 3 clips.
(c) Install the console box LH with the bolt [A] and clip.
12. INSTALL CONSOLE BOX INSERT
(a) Engage the 2 claws and 2 clips to install the console box insert.
13. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation
14. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 2 guides and 6 claws to install the integration control and panel assembly.
15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
(a) Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.
16. INSTALL REAR CONSOLE BOX ASSEMBLY Installation
17. INSTALL CONSOLE BOX CARPET Installation
18. INSTALL REAR CONSOLE BOX POCKET Installation
19. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 12 claws to install the upper console panel sub-assembly.
NOTICE:
When installing the upper console panel sub-assembly, make sure not to pinch the wire harness connected to the front end of the remote touch (w/ Navigation System).
(d) Close the console compartment door.
20. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
(a) Engage the 3 guides, clip and 4 claws to install the upper No. 1 console panel garnish.
21. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
(a) Engage the 2 guides, clip and 5 claws to install the upper No. 2 console panel garnish.
22. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
23. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL Installation
24. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation
25. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the clip.
(d) Install the No. 1 instrument panel under cover sub-assembly with the 2 screws [E].
26. INSTALL STEERING COLUMN COVER Installation
27. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
28. INSTALL FRONT DOOR SCUFF PLATE LH Installation
29. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
Installation
30. INSPECT SHIFT LEVER Installation