Reassembly

SLIDING ROOF / CONVERTIBLE: SLIDING ROOF HOUSING: REASSEMBLY

1. INSTALL SUNSHADE TRIM SUB-ASSEMBLY

(a) Insert the sunshade trim into the sliding roof housing sub-assembly.





(b) Install the sliding roof piece sub-assembly LH with the screw.





Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL SLIDING ROOF DRIVE GEAR ASSEMBLY

(a) Install the sliding roof drive gear assembly with the 2 bolts.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)