Disassembly

2ZR-FXE ENGINE MECHANICAL: CYLINDER HEAD: DISASSEMBLY

1. REMOVE INTAKE VALVE

(a) Place the cylinder head on wooden blocks.

(b) Using SST and wooden blocks, compress and remove the valve retainer locks.





SST : 09202-70020

09202-00010

HINT
Arrange the removed parts in the correct order.

(c) Remove the retainer, valve spring and valve.

HINT
Arrange the removed parts in the correct order.

2. REMOVE EXHAUST VALVE

(a) Place the cylinder head on wooden blocks.

(b) Using SST and wooden blocks, compress and remove the valve retainer locks.





SST : 09202-70020

09202-00010

HINT
Arrange the removed parts in the correct order.

(c) Remove the retainer, valve spring and valve.

HINT
Arrange the removed parts in the correct order.

3. REMOVE VALVE STEM OIL SEAL

(a) Using needle-nose pliers, remove the oil seals.





4. REMOVE VALVE SPRING SEAT

(a) Using compressed air and a Magnet Hand, remove the valve spring seats by blowing air onto them.





5. REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:
If water leaks from the straight screw plug or the plug is corroded, replace it.





(a) Using a 10 mm straight hexagon wrench, remove the 3 screw plugs and 3 gaskets.

6. REMOVE STUD BOLT

NOTICE:
If a stud bolt is deformed or its threads are damaged, replace it.