Installation

LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

(a) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.

Torque : 6.3 Nm (64 kgf-cm, 56 in-lbf)

(b) Connect the connector.

2. INSTALL CENTER PILLAR LOWER GARNISH Installation

3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Installation

4. INSTALL LAP BELT OUTER ANCHOR COVER Installation

5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

for LH Side: Installation

for RH Side: Installation

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

for LH Side: Installation

for RH Side: Installation

7. INSTALL REAR DOOR SCUFF PLATE Installation

8. INSTALL FRONT DOOR SCUFF PLATE Installation