Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Engage the 2 guides and install the rear height control sensor sub-assembly with the 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

(c) Engage the clamp.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

4. INSTALL DECK FLOOR BOX RH Installation

5. INSTALL REAR NO. 3 FLOOR BOARD Installation

6. INSTALL REAR DECK FLOOR BOX Installation

7. INSTALL REAR NO. 2 FLOOR BOARD Installation

8. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

Initialization

9. ADJUST HEADLIGHT AIMING

Headlight Assembly (For LED Headlight)