Installation

LIGHTING (EXT): HEADLIGHT LEVELING ECU: INSTALLATION

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

(a) Engage the guide.

(b) Install the headlight leveling ECU assembly with the nut.

(c) Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL RH Installation

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

8. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

11. INSTALL DECK FLOOR BOX RH Installation

12. INSTALL REAR NO. 3 FLOOR BOARD Installation

13. INSTALL REAR DECK FLOOR BOX Installation

14. INSTALL REAR NO. 2 FLOOR BOARD Installation

15. PERFORM DIAGNOSTIC SYSTEM CHECK

Reading and Clearing Diagnostic Trouble Codes

16. INSPECT SRS WARNING LIGHT

Diagnosis System

17. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

Initialization

18. ADJUST HEADLIGHT AIMING

Headlight Assembly (For LED Headlight)