Installation

LIGHTING (EXT): REAR LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR LIGHT ASSEMBLY

(a) Install the rear light assembly with the 3 nuts.





Nut (A) - Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

Nut (B) - Torque : 3.9 Nm (40 kgf-cm, 35 in-lbf)

(b) Connect the connector and engage the clamp.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Reassembly

3. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

4. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY Reassembly