Installation

P410 HYBRID TRANSMISSION / TRANSAXLE: TCM: INSTALLATION

1. INSTALL TRANSMISSION CONTROL ECU ASSEMBLY

(a) Engage the 2 claws to install the transmission control ECU assembly to the ECU integration box.





2. INSTALL ECU INTEGRATION BOX RH Installation

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL INSTRUMENT SIDE PANEL RH Installation

7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure described for the LH side Installation.

10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

12. INSTALL DECK FLOOR BOX RH Installation

13. INSTALL REAR NO. 3 FLOOR BOARD Installation

14. INSTALL REAR DECK FLOOR BOX Installation

15. INSTALL REAR NO. 2 FLOOR BOARD Installation

16. PERFORM DIAGNOSTIC SYSTEM CHECK

Reading and Clearing Diagnostic Trouble Codes

17. INSPECT SRS WARNING LIGHT

Diagnosis System