Installation

CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

(a) Engage the claw and install the driving support ECU assembly.





HINT
If the park assist ECU was removed, install it after installing the driving support ECU assembly Installation.

2. INSTALL ECU INTEGRATION BOX RH Installation

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

6. INSTALL INSTRUMENT SIDE PANEL RH Installation

7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side Installation.

9. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

12. INSTALL DECK FLOOR BOX RH Installation

13. INSTALL REAR NO. 3 FLOOR BOARD Installation

14. INSTALL REAR DECK FLOOR BOX Installation

15. INSTALL REAR NO. 2 FLOOR BOARD Installation

16. INSPECT SRS WARNING LIGHT

Diagnosis System