Installation

2ZR-FXE COOLING: TEMPERATURE SWITCH: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Using a union nut wrench (19 mm), install the engine coolant temperature sensor.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

NOTICE:
Do not apply any excessive force to the heater pipe when installing the engine coolant temperature sensor.

(b) Connect the connector.

2. ADD COOLANT (for Engine) Service and Repair

3. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection

4. INSTALL NO. 2 CYLINDER HEAD COVER Installation

5. INSTALL NO. 1 ENGINE UNDER COVER