Headlamp Alignment Sensor: Testing and Inspection

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSPECTION

1. INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Connect 3 dry cell batteries (1.5 V) in series.





(b) Connect the positive (+) lead from the batteries to terminal 3 (SHB) and the negative (-) lead from the batteries to terminal 1 (SHG).

(c) Measure the voltage between terminals 2 (SHRR) and 1 (SHG) while slowly moving the link up and down.

Standard Voltage:





Text in Illustration





If the result is not as specified, replace the rear height control sensor sub-assembly.