Removal

STEERING COLUMN: HEATED STEERING WHEEL CONTROLLER: REMOVAL

NOTICE:
* Do not replace the spiral cable with the battery connected and the power switch on (IG).
* Do not rotate the spiral cable without the steering wheel with the battery connected and the power switch on (IG).
* Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.
* Do not remove the steering sensor from the spiral cable.

1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

2. REMOVE HORN BUTTON ASSEMBLY

Removal

3. REMOVE STEERING WHEEL ASSEMBLY Removal

4. REMOVE STEERING PAD SWITCH ASSEMBLY Removal

5. REMOVE CRUISE CONTROL SWITCH Removal

6. REMOVE CRUISE CONTROL SWITCH WIRE Removal

7. REMOVE STEERING SHAKE DAMPER Removal

8. REMOVE LOWER STEERING WHEEL BOSS COVER Removal

9. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY

(a) Disengage the clamp.





(b) Remove the 2 screws and steering wheel heater control assembly from the lower steering wheel boss cover.