Repair Instruction - Initialization

INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED





NOTICE:
When the auxiliary battery is replaced or the cable is disconnected from its negative (-) auxiliary battery terminal, the ISC learning value will be initialized and symptoms as a loud rattle from the hybrid vehicle transaxle assembly may occur until ISC learning is performed. Therefore, perform ISC learning when the auxiliary battery is replaced or the cable is disconnected from the negative (-) terminal of the auxiliary battery Loud Rattle From Hybrid Vehicle Transmission.

2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED