Removal

WINDOW / GLASS: QUARTER WINDOW GLASS: REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE Removal

2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP Removal

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

4. REMOVE REAR SEAT CUSHION LOCK HOOK Removal

5. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side) Removal

6. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side) Removal

7. REMOVE REAR NO. 2 FLOOR BOARD Removal

8. REMOVE REAR DECK FLOOR BOX Removal

9. REMOVE REAR NO. 3 FLOOR BOARD Removal

10. REMOVE DECK FLOOR BOX RH Removal

11. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE Removal

12. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer) Removal

13. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer) Removal

14. REMOVE DECK FLOOR BOX LH (w/o Woofer) Removal

15. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

16. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Removal

17. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Removal

18. REMOVE REAR NO. 1 FLOOR BOARD Removal

19. REMOVE DECK TRIM SERVICE HOLE COVER Removal

20. REMOVE REAR DECK TRIM COVER Removal

21. REMOVE REAR SEAT SIDE COVER RH (for RH Side) Removal

22. REMOVE REAR SEAT SIDE GARNISH Removal

23. REMOVE ROPE HOOK ASSEMBLY Removal

24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal

25. REMOVE TONNEAU COVER HOOK Removal

26. REMOVE TONNEAU COVER HOLDER CAP Removal

27. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for RH Side) Removal

28. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY Removal

29. REMOVE DECK TRIM SIDE PANEL ASSEMBLY Removal

30. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY Removal

31. REMOVE QUARTER WINDOW ASSEMBLY

(a) Apply protective tape to the outer surface of the vehicle body to prevent scratches.





Text in Illustration





(b) Pass a piano wire between the vehicle body and glass as shown in the illustration.





Text in Illustration





(c) Tie both wire ends to wooden blocks or similar objects that can serve as handles.

NOTICE:
When separating the quarter window assembly from the vehicle, be careful not to damage the paint or interior and exterior ornaments.

(d) Cut off the adhesive by pulling the piano wire around the quarter window assembly.

NOTICE:
Leave as much adhesive on the vehicle body as possible when cutting through the adhesive.

(e) Using suction cups, disengage the 2 clips and remove the quarter window assembly.





NOTICE:
Be careful not to drop the quarter window assembly.

32. CLEAN VEHICLE BODY

(a) Clean and shape the contact surfaces of the vehicle body.





Text in Illustration





(1) Using a knife, cut away excess adhesive on the contact surfaces of the vehicle body as shown in the illustration.

NOTICE:
Be careful not to damage the vehicle body.

HINT
Leave as much adhesive on the vehicle body as possible.

(b) Clean the contact surfaces of the vehicle body with a piece of cloth saturated with cleaner.

HINT
Even if all the adhesive has been removed, clean the vehicle body.