Intuitive Parking Assist System

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: PRECAUTION

1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
* When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.






2. PRECAUTIONS FOR INTUITIVE PARKING ASSIST SYSTEM

(a) Under the following conditions, the detection function may not function properly:

(1) The sensor is covered with foreign matter, such as mud or snow (detection function returns to normal when the sensor is cleaned).

(2) The sensor is frozen (detection function returns to normal when the temperature of the sensor rises).

(3) The sensor is covered with a hand.

HINT
* In very cold weather where a malfunction display appears, the sensor may not be able to detect obstacles.
* If the malfunction display appears, visually check the sensor first. If the sensor is free of foreign matter but the malfunction display remains, the sensor may have a malfunction.

(b) The detection range may be affected by the following conditions:

(1) The sensor is covered with foreign matter, such as mud or snow.

(2) The vehicle is in an excessively hot or cold area.

(c) Under the following conditions, a detection error may occur:

(1) Driving on a bumpy road, an unpaved road, or in tall grass.

(2) Ultrasonic waves from items such as another vehicle's horn, motorcycle engine sounds, a large vehicle's air brake sound, or another vehicle's sonar are transmitted near the vehicle.

(3) It is raining heavily or the sensor comes into contact with water (sprayed).

(4) The vehicle is tilted at a large angle.

(5) The vehicle is equipped with a commercial fender pole or a wireless mechanism antenna.

(6) The sensor is covered with foreign matter, such as mud or snow.

(7) The vehicle is moving toward a high curb or the corner of a pointed object.

(d) The sensor cannot detect some objects such as the following:

(1) Thin objects, such as wires and ropes.

(2) Materials that absorb ultrasonic waves, such as cotton, snow, etc.

(3) Objects with sharp edges.

(4) Short objects.

(5) Tall, overhanging objects.

(e) Other notices:

(1) The sensor cannot detect objects directly under the bumper. (The sensor may detect low objects and thin poles, and then lose track of the objects.)

(2) The sensor may not be able to detect obstacles that are too close to the sensor.

(3) The sensor may not be able to detect obstacles if it is dropped or subjected to a strong impact.