Installation

AUDIO / VISUAL: RADIO RECEIVER: INSTALLATION

1. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)

(a) Engage the 2 claws and 6 clips and install the radio receiver assembly.





2. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

(a) Install the No. 2 radio bracket with the screw and 4 bolts.





3. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

(a) Install the No. 1 radio bracket with the screw and 4 bolts.





4. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)

(a) Connect each connector.

(b) Engage the 2 clips.





(c) Install the integration control panel with radio receiver assembly with the 4 bolts.

5. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)

(a) Engage the 2 claws and 4 clips and install the radio receiver assembly.





6. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)

(a) Install the No. 2 radio bracket with the 6 bolts.





7. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)

(a) Install the No. 1 radio bracket with the 6 bolts.





8. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)

(a) Connect each connector.

(b) Engage the 2 clips.





(c) Install the display and navigation module display with radio receiver assembly with the 4 bolts.

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

11. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE Installation

12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. ADJUST CLOCK