Instrument Panel, Gauges and Warning Indicators: Description and Operation

METER: METER / GAUGE SYSTEM: SYSTEM DIAGRAM





INPUT AND OUTPUT SIGNALS OF THE COMBINATION METER ASSEMBLY:













*1: with Seat Position Memory System

*2: with Intuitive Parking Assist System

*3: for U.S.A.

*4: for Canada

*5: with Dynamic Radar Cruise Control System

*6: with Pre-collision System

*7: with AFS

*8: with Tire Pressure Warning System

*9: without Navigation System

*10: with Navigation System






SYSTEM DESCRIPTION

1. METER GAUGE





(a) METER GAUGE





(b) WARNING/INDICATOR





*1: for U.S.A.

*2: for Canada

*3: with Pre-collision System

*4: with Tire Pressure Warning System

*5: with AFS

*6: w/ Dynamic Radar Cruise Control System

*7: without Navigation System

*8: with Navigation System

(c) MULTI-INFORMATION DISPLAY

HINT
* The multi-information display has been located in the center of the combination meter assembly.
* The display shows a message or animation for each of the functions described in the table below.





*1: for U.S.A.

*2: with Dynamic Radar Cruise Control System

*3: with Intuitive Parking Assist System

2. MULTI-INFORMATION DISPLAY

















3. DIAGNOSIS SYSTEM





HINT
* Diagnosis information can be displayed on the multi-information display after connecting a jumper wire between TC and CG of the DLC3 Diagnosis System.
* The multi-information display shows "DIAG VSC" before meter CPU receives the diagnosis information signal from the skid control ECU.
* The multi-information display shows "DIAG VSC 23" when the meter CPU receives the diagnosis information signal from the skid control ECU.
* The multi-information display shows "DIAG VSC OK" when the meter CPU receives the no diagnosis information signal from the skid control ECU.