Installation

HORN: LOW PITCHED HORN: INSTALLATION

1. INSTALL LOW PITCHED HORN ASSEMBLY

(a) Install the low pitched horn assembly with the bolt.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)





(b) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT Adjustments

5. PREPARATION FOR FOG LIGHT AIMING Adjustments

6. FOG LIGHT AIMING INSPECTION Adjustments

7. FOG LIGHT AIMING ADJUSTMENT Adjustments