Disassembly

2GR-FE FUEL: FUEL PUMP: DISASSEMBLY

1. REMOVE NO. 2 FUEL SUCTION SUPPORT

(a) Using a screwdriver with its tip wrapped with tape, disengage the 5 snap claws from the claw holes, and remove the No. 2 fuel suction support.





NOTICE:
Do not damage the fuel suction support.

2. REMOVE FUEL PUMP CUSHION RUBBER

(a) Remove the fuel pump cushion rubber from the fuel pump.





3. REMOVE FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the fuel sender gauge connector (*1).





(b) Unlock the fuel sender gauge, and slide it to remove (*2).

4. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

(a) Disconnect the fuel pump connector (*1).





(b) Using a screwdriver with its tip wrapped with tape, disengage the 4 snap claws from the claw holes, and pull out the fuel suction plate.

NOTICE:
Do not damage the fuel suction support.

5. REMOVE FUEL PUMP HARNESS

(a) Disconnect the connector (*1).





(b) Using a screwdriver, pry out the fuel pump harness (*2).

6. REMOVE FUEL PUMP

(a) Pull out the fuel pump from the fuel filter.





7. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

(a) Pull out the fuel pressure regulator from the fuel filter.





(b) Remove the O-ring from the fuel pressure regulator.