Removal

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Rear Side): REMOVAL

1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG Disassembly

2. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY Disassembly

3. REMOVE COURTESY LIGHT ASSEMBLY Disassembly

4. REMOVE REAR DOOR ARMREST COVER Disassembly

5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP Disassembly

7. REMOVE REAR DOOR SERVICE HOLE COVER Disassembly

8. REMOVE REAR DOOR TRIM BRACKET Disassembly

9. REMOVE REAR DOOR GLASS RUN Disassembly

10. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY Disassembly

11. REMOVE REAR DOOR QUARTER WINDOW GLASS Disassembly

12. REMOVE REAR DOOR GLASS SUB-ASSEMBLY Disassembly

13. REMOVE REAR DOOR LOCK ASSEMBLY Disassembly

14. REMOVE REAR DOOR OUTSIDE HANDLE COVER Disassembly

15. REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY

(a) Disconnect the connector.





(b) Using a "TORX" socket wrench (T30), loosen the screw.

(c) Pull and hold the release plate of the outside handle frame as shown in the illustration.





NOTICE:
The release plate may interfere with the outside handle and may be damaged when removing the handle, unless the release plate of the outside handle frame is pulled and held.

(d) Remove the rear door outside handle assembly as shown in the illustration.