Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Install the headlight dimmer switch assembly with the clamp.





(c) Connect the connector.

2. INSTALL TILT AND TELESCOPIC SWITCH Installation

3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation

4. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation

5. INSTALL STEERING COLUMN COVER Installation

6. ADJUST SPIRAL CABLE Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSPECT STEERING WHEEL CENTER POINT

9. INSTALL STEERING PAD Installation

10. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation

11. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

13. INSPECT STEERING PAD Installation

14. INSPECT SRS WARNING LIGHT

Diagnosis System

15. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.