Removal

INTERIOR: REAR SUNSHADE ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

5. REMOVE REAR SEATBACK ASSEMBLY Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal

7. REMOVE REAR DOOR SCUFF PLATE RH Removal

8. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH Removal

9. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH

HINT
Use the same procedure for the LH side and RH side.

10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal

12. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

13. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Removal

14. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Removal

15. REMOVE REAR SEAT SHOULDER BELT HOLE COVER Removal

16. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Disengage the 2 clips and raise the front portion of the package tray trim panel assembly.

(b) Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly.





(c) Remove the package tray trim panel assembly.

17. REMOVE CENTER STOP LIGHT SET Removal

18. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Disengage the 3 clips and 6 claws, and remove the No. 2 package tray trim panel assembly.





19. REMOVE REAR WINDOW SHADE ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 4 bolts [A].

(c) Loosen bolt [B] and remove the rear window shade assembly.

NOTICE:
Bolt [B] cannot be removed from the rear window shade assembly.

20. REMOVE REAR SUNSHADE RELAY

NOTICE:
When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

(a) Remove the screw.





(b) Disengage the 4 claws and remove the rear sunshade relay cover.

(c) Disconnect the connector.





(d) Remove the 2 screws and the rear sunshade relay.