Rear View Monitor System
PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HINT
* Use the following procedure to troubleshoot the rear view monitor system.
* *: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. INSPECT BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION
Result:
B -- Go to step 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK FOR DTC (OTHER SYSTEMS)*
(a) Refer to DTC Check/Clear for the corresponding system.
Navigation System (for HDD) Navigation System (for HDD)
Navigation System (for DVD) Navigation System (for DVD)
Electro Multi Vision System Reading and Clearing Diagnostic Trouble Codes
Result:
B -- Go to NAVIGATION SYSTEM (for HDD) Navigation System (for HDD)
C -- Go to NAVIGATION SYSTEM (for DVD) Navigation System (for DVD)
D -- Go to ELECTRO MULTI VISION SYSTEM Electro Multi Vision System
A -- Continue to next step.
7. CHECK IF THE SAME SYMPTOM APPEARS IN THE OTHER SYSTEMS
(a) Refer to Problem Symptoms Table for the corresponding system.
Navigation System (for HDD) Problem Symptoms Table
Navigation System (for DVD) Problem Symptoms Table
Electro Multi Vision System Problem Symptoms Table
Result:
B -- Go to NAVIGATION SYSTEM (for HDD) (FOLLOW PROBLEM SYMPTOMS TABLE TO PERFORM TROUBLESHOOTING)
C -- Go to NAVIGATION SYSTEM (for DVD) (FOLLOW PROBLEM SYMPTOMS TABLE TO PERFORM TROUBLESHOOTING)
D -- Go to ELECTRO MULTI VISION SYSTEM (FOLLOW PROBLEM SYMPTOMS TABLE TO PERFORM TROUBLESHOOTING)
A -- Continue to next step.
8. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Problem Symptoms Table.
Result:
B -- Go to step 10
A -- Continue to next step.
9. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Terminals of ECU Rear View Monitor System (w/o Navigation System)
NEXT -- Continue to next step.
10. CIRCUIT INSPECTION
NEXT -- Continue to next step.
11. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
12. CONFIRMATION TEST
NEXT -- END