Removal

UF1AE TRANSFER: TRANSFER WIRE: REMOVAL

1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

Removal

2. DRAIN AUTOMATIC TRANSMISSION FLUID Removal

3. SUPPORT AUTOMATIC WITH TRANSFER TRANSMISSION ASSEMBLY Removal

4. REMOVE ENGINE REAR MOUNTING MEMBER

(a) Remove the 4 bolts, 3 nuts and engine rear mounting member.





5. REMOVE TRANSFER DYNAMIC DAMPER

(a) Remove the 2 bolts and the transfer dynamic damper.





6. REMOVE TRANSFER OIL PAN

(a) Remove the 9 bolts.





(b) Insert the blade of an oil pan seal cutter between the transfer oil pan and transfer case. Cut through the sealer and remove the transfer oil pan.





NOTICE:
Do not damage the contact surface of the transfer oil pan.

(c) Remove the transfer oil cleaner magnet from the transfer oil pan.





NOTICE:
* Clean the inside of the oil pan thoroughly, removing all metal shavings, sludge and any other foreign objects.
* Remove any metal shavings from the magnet.

7. REMOVE TRANSFER WIRE

(a) Remove the 4 bolts and the transfer upper valve body.





(b) Disconnect the 2 transfer wire connectors.

(c) Remove the bolt and the transfer wire.