Removal

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE UPPER STEERING COLUMN COVER

for 2GR-FSE: Removal

for 1UR-FSE: Removal

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Using a screwdriver, disengage the 5 clips.

HINT
Tape the screwdriver tip before use.

(b) Remove the instrument cluster finish panel sub-assembly and then disconnect the connector.

4. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 4 screws.

(b) Disconnect the connector and remove the combination meter assembly.

5. REMOVE COMBINATION METER GLASS

(a) Using a screwdriver, disengage the 2 claws and open the cover.

HINT
Tape the screwdriver tip before use.

(b) Disconnect the 3 connectors.